After purchasing a Volvo diesel generator, we will usually ask the staff to carry out field debugging. If other factors do not allow staff to come in person to debug. We’ll have to do it ourselves. What should we pay attention to when tuning our own Volvo diesel generator? We need to pay attention to the following:
1. Add water to the tank of the Volvo diesel generator. First turn off the drain valve, add clean drinking water or pure water to the position of the tank mouth, cover the tank.
2. Add oil. Choose CD-40 Great Wall diesel oil. Machine oil is divided into summer and winter two kinds, different seasons choose different oil, in the process of adding oil to observe the ruler, until the oil added to the ruler scale filled with azimuth, cover the oil cover, do not add more, too much oil will cause the phenomenon of oil and burning oil.
3. The oil intake and return of the machine should be identified. In order to ensure that the oil intake of the machine is clean, the diesel oil is generally allowed to deposit for 72 hours. Do not insert the oil into the bottom of the cylinder, so as not to suck dirty oil and block the tubing.
4, pump diesel oil, first loosen the screw on the hand pump, hand shake the handle of the oil pump. Pull and press evenly until the oil enters the pump.
5. Let the air out. If you want to loosen the air release screw of the high pressure oil pump, and then press the oil pump by hand, you will see oil and bubbles overflow in the screw hole until you see the full flow of oil. Tighten the screws.
Post time: Mar-30-2023