What Preparations Need To Be Made Before Starting The Diesel Generator Set?

1. Check the oil: check whether the type and grade of the lubricating oil load the engine requirements and environmental requirements, and check the oil level of the engine lubricating oil. The normal oil level is between L and H. Pay attention to the oil consumption compared with the last oil level. The normal oil consumption of the engine is less than 5‰ of the fuel consumption.

2. Check the liquid level of the cooling water: check whether the cooling liquid in the water tank is full, check whether the water tank is leaking, whether the cooling network of the water tank is blocked, check whether the cooling liquid is added with antiseptic or antifreeze, the cooling liquid should be distilled water or Soften the water. Note that the water tank cover cannot be opened when the machine is stopped to prevent burns. Be sure to cover the water tank cover after checking.

3. Check the fuel: check whether the label of the fuel is consistent with the ambient temperature, check whether there is any sludge and moisture drained from the bottom of the fuel tank and the bottom of the oil-water separator, and check whether the fuel pipe is leaking or leaking, such as air in the oil circuit The air must be vented. Check whether the fuel pipe valve is open.

4. Check the battery: check the battery power indicator (if there is an indicator, generally blue indicates the power is normal), check whether the battery liquid level is appropriate, between the low and high positions, not too full, not too low, the specific gravity of the battery liquid acidity is 1.28, according to the acidity of the liquid to confirm the addition of replenisher or distilled water. Check whether the battery connection is secure.

5. Check the unit circuit: check whether the output cable of the generator is firm, whether the insulation sheath is damaged, and check whether the control circuit is loose, open, or short-circuited.

6. Check various connections: check the tightness of fan belts, water pump belts, charger belts and whether there is any damage or offset, and check whether various soft-connected water pipes and air pipes are loose or damaged.

7. Check the intake and exhaust: check whether the intake and exhaust are normal, check whether the intake of the supercharger is blocked, the intake pressure indicator shows red to indicate that the intake is blocked, and check whether the intercooler is leaking.

8. Check the generator, generator, and water tank for foreign matter.