What are the safe operation steps of diesel generator sets?

Today a brief introduction to the mobile power company. Safe operation rules for diesel generators:
1. After receiving the operation readiness signal, carefully check whether the diesel engine lubrication is on the specified oil, check the amount of oil and water, remove the relevant things near the machine, and confirm that the oil volume temperature is above 20.
2. Pipe valves of each system are located in the open and closed position, please tighten the connection of the transmission mechanism.
3. Manually rotate the crankshaft of the diesel engine at 720 degrees to ensure that the internal components are normal and the handle will rotate the speed control work to the starting position.
4. Confirm that the starting power supply voltage is normal, close the shutter, press the start button, and release the diesel engine immediately after ignition. After the pressure of the lubricating oil reaches the specified value, it gradually accelerates to a voltage of 380 volts and a frequency of 50Hz before loading.
5. If you cannot afford to start twice, please carefully check the cause, troubleshoot the fault, start, and report to the relevant personnel.
6. Periodically check and record the changes of hydraulic pressure, oil temperature, water temperature and load during work, and prohibit all relevant personnel from entering the work area. What are the safe operation steps of diesel generator sets?
The staff on duty must protect their position and do their job.
8. After receiving the stop signal, slowly unload the load at 850 RPM and close the throttle after idling for 2-3 minutes.
9. After shutdown, close or open the valves of each system to check oil and water consumption, supply, equipment maintenance, equipment maintenance exception, fault exception in work, etc.