Diesel generator set is mainly composed of diesel engine, synchronous alternator, water tank, integrated control screen, supporting electrical control equipment and various auxiliary components, and the temperature regulator is a very important component of the diesel engine cooling system, its role is according to the size of the diesel generator load and the level of water temperature automatically change the water flow through the tank radiator. Ensure that the diesel generator works at a good temperature.
First, the diesel generator set temperature regulator is prone to failure
In the working process of the diesel generator, the main fault of the temperature regulator is that the outlet valve cannot be opened and closed flexibly. If the outlet valve station is opened too early, the preheating time of the diesel generator will be prolonged. If the outlet valve is opened too late, it will cause the diesel generator to overheat. Therefore, after the diesel generator is used for a period of time, the temperature regulator should be removed for technical inspection.
Two, diesel generator set thermostat damaged after repair
After the temperature regulator is damaged, it should generally be replaced with a new part, and in special cases, solder can also be used to repair cracks or cracks. The specific method is: repair the damage with solder, and then inject alcohol or ethanol with a syringe above the expansion cylinder, and then put the thermostat in hot water, until the alcohol or ethanol through expansion to discharge the air, and then use solder to close the pinhole. In order to prevent alcohol or ethanol volatilization, welding repair should be fast. The temperature regulator is generally assembled at the interface of the cylinder head outlet pipe.
For more questions about the generator set, please call the Beidou Power team. More than ten years of professional production and sales of power generation equipment experience, more professional engineer team to serve you, choose Beidou power is to choose rest assured, welcome on-site factory inspection.
Post time: Sep-13-2024