Since the environment of each region is different, in order to ensure the normal operation of the diesel generator set, we must fully consider the impact of various complex environments on the generator set, and then take corresponding countermeasures to create a good operating environment for the generator set.
First of all, we must first understand what complex environments may appear: 1. The air humidity is high, which is easy to oxidize the surface of the diesel generator set; 2. Rainwater; 3. Dust or sand.
1. Add an anti-condensation heater, which is suitable for environments with high humidity in the air and prone to condensation. When the generator is not running, turn on the heater, so that the body temperature of the generator is about 5°C higher than the ambient temperature. Turn off heater power during operation.
2. IP23 protection grade, used in rainwater environment. The standard IP22 is to prevent vertical rainwater from entering the inside of the motor, and the IP23 protection level can prevent the rainwater that is 60 degrees from the vertical from entering the inside of the motor.
3. A high-quality air filter is used in places where there is a lot of sand or dust in the air to ensure the filtering effect and prolong the service life of the engine.
The above is the solution for diesel generator sets to deal with different complex environments. Of course, please pay attention to a common problem, that is, the operating ambient temperature. According to the international technical requirements, the ambient temperature of the unit is 40°C, so if the ambient temperature exceeds 40°C during use, you must reduce the power of the diesel generator set. run.
Post time: May-13-2022