First, open the battery and water cover to see if the water level is in the normal position. Generally, there will be upper and lower limit marks on the side of the battery for user reference. If the water level is found to be below the mark line, distilled water must be added, if there is no distilled water, then filtered tap water can be used for emergency. Water can not be added too much, the standard is to add to the middle of the top and bottom line.
Second, scrub the outside of the battery with a wet cloth, and wipe clean the dust, oil, and white powder on the panel and pile head (that is, the positive and negative pole heads) that is easy to cause leakage of dirt. This often scrubs the battery, the battery pile head will not accumulate white acid corrosion powder, its service life will be longer.
Third, check whether the battery is charged normally. If the user has a three-purpose meter, after starting the engine, measure the voltage at the two poles of the battery, and it must be more than 13V to be normal. Found that the charging voltage is too low, you need to ask a professional to overhaul the charging system. If there is no three-purpose meter, the visual method can be used: after the engine starts, open the battery and water cover to see if there are no bubbles in each small cell. The normal condition is that bubbles are constantly rising to the surface of the water, and the more oil will rise; If it does not bubble, it is likely that there is a problem with the charging system. It should be noted that hydrogen will be produced when doing this test, so there must be no open flame during the test to avoid explosion and fire.
For more questions about the generator set, please call the Beidou Power team. More than ten years of professional production and sales of power generation equipment experience, more professional engineer team to serve you, choose Beidou power is to choose rest assured, welcome on-site factory inspection.
Post time: Oct-28-2024