Diesel engine in the work after a certain time, due to the operation, friction, vibration and load changes, it is inevitable to produce the loosening of each part of the connector, parts wear, corrosion, fatigue, aging and debris blockage phenomenon, the result will make the locomotive horsepower decline, increase fuel consumption, reduce the efficiency, each component imbalance, and even damage. In order to keep the locomotive in good technical condition and extend its service life, a series of technical maintenance measures such as checking, cleaning, lubricating, fastening, adjusting or replacing some parts of the locomotive must be carried out timely.
1. Regularly check the technical status of the front wheel positioning and steering device. Regular inspection and adjustment of front wheel positioning, front wheel bearing clearance and steering device is an important measure to reduce tire wear and reduce deformation and damage of walking parts. Inspection should be carried out according to the required values of each type of tractor and adjusted if necessary. In particular, special attention should be paid to the front wheel bundle, front wheel bearing clearance, steering knuckle spindle fixing nut and cross tie rod fixing nut.
2, in strict accordance with the operation procedures. Start to be smooth, in the field and uneven road should be driven at low speed, not high speed beyond the ridge, ditch and high-speed sharp turns, transportation operations to maintain a moderate speed, as far as possible to avoid emergency braking, according to the size of the load to choose the appropriate gear, do not often overload the tractor operation.
3, maintain normal tire pressure and track tension. The pressure is too high, the buffer effect is weakened, the tractor vibration is intensified, it is easy to damage the parts and cause the driver fatigue; In field operation, the high pressure will deteriorate the adhesion performance, increase the sag and rolling resistance, and even cause the inner tube to burst when the high pressure encounters the impact. The air pressure is too low, the tire deformation is large, the driving resistance is increased, and the tire is heated, accelerating aging and damage. Tire pressure should be appropriate with the season, temperature and operating conditions. The track of the track tractor is too tight and too loose, which will accelerate the wear of the track plate, the track pin and the wheel, and seriously derail and jam the track, causing damage to the machine parts.
Diesel generator sets must pay attention to daily inspection and maintenance to keep all parts clean. Often check the fastening of hub bolts, nuts and cotter pins and other parts to keep the fastening reliable. Grease is added to the swinging shaft bushing, front wheel shaft and steering knuckle on each shift. Often check the oil level of the belt wheel, guide wheel, support wheel, etc., add lubricating oil if necessary, and clean and change the oil regularly as required. Remove dirt and oil in time. Keep the walking parts clean, especially pay attention not to make the tires polluted by gasoline, diesel, oil and acid alkali, to prevent corrosion and aging. When removing and assembling tires, do not use sharp tools to prevent damage to the tire, and pay attention to the direction of the tire pattern when installing. From the top down, the top of the word “man” or “eight” must face the direction of the tractor. Regular use of symmetrical components such as left and right tires, drive wheels, crank shafts and tracks to extend service life.
For more questions about the generator set, please call the Beidou Power team. More than ten years of professional production and sales of power generation equipment experience, more professional engineer team to serve you, choose Beidou power is to choose rest assured, welcome on-site factory inspection.
Post time: Mar-31-2025